Evidence Cross-8/HPoE-10G, User Manual

Page: 200 / 321


Group Name :
The name identifying the privilege group. In most cases, a privilege level group consists of
a single module (e.g. LACP, STP or QoS), but a few of them contains more than one. The
following description defines these privilege level groups in details:
System: Contact, Name, Location, Timezone, Daylight Saving Time, Log.

Privilege Levels :
Every group has an authorization Privilege level for the following sub groups: configuration
read-only, configuration/execute read-write. User Privilege should be same or greater than
the authorization Privilege level to have the access to that group.
Buttons

Apply :
Click to save changes.

Reset :
Click to undo any changes made locally and revert to previously saved values.
11-1.3 Auth Method
This page shows how to configure a user with auth method when he logs into the switch via
one of the management client interfaces.
Web Interface
To configure an Auth Method Configuration in the web interface:
1. Click Security, Management and Auth Method.
2. Specify the Client (console, telent, ssh, web) which you want to monitor.
3. Specify the Methods (none, local, radius, tacacs), Service port, Cmd Lvl, Cfg Cmd,
Fallback, Exec.
4. Click Apply.