Evidence Cross-8/HPoE-10G, User Manual

Page: 287 / 321

Chapter 16 PTP
16-1 Configuration
This page allows the user to configure and inspect the current PTP clock settings.
Web Interface
To configure the PTP in the web interface:
1.
Click PTP and Configuraiton.
2. Scroll to select the mode to enable or disable
3. Specify the parameters in each blank field.
4. Click the save to save the setting
5. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
Figure 16-1: The PTP configuration
Parameter description:
PTP External Clock Configuration

One_PPS_Mode :
This Selection box will allow you to select the One_pps_mode configuration.
The following values are possible:
1. Output : Enable the 1 pps clock output
2. Input : Enable the 1 pps clock input
3. Disable : Disable the 1 pps clock in/out-put

External Enable :
This Selection box will allow you to configure the External Clock output.
The following values are possible: