Evidence Cross-8/HPoE-10G, User Manual

Page: 183 / 321

Permit: Group address matches the range specified in the rule will be learned.
Deny: Group address matches the range specified in the rule will be dropped.

Log :
Indicates the logging preference upon receiving the Join/Report frame that has the group
address matches the address range of the rule.
Enable: Corresponding information of the group address, that matches the range specified
in the rule, will be logged.
Disable: Corresponding information of the group address, that matches the range specified
in the rule, will not be logged.

Rule Management Buttons :
You can manage rules and the corresponding precedence order by using the following
buttons:
: Insert a new rule before the current entry of rule.
: Delete the current entry of rule.
: Moves the current entry of rule up in the list.
: Moves the current entry of rule down in the list.
Buttons

Add New Filtering Profile :
Click to add new IPMC profile. Specify the name and configure the new entry. Click "Save".

Delete :
Check to delete the entry.
The designated entry will be deleted during the next save.

Apply :
Click to save changes.

Reset :
Click to undo any changes made locally and revert to previously saved values.

Add Last Rule :
Click to add a new rule in the end of the specific profile's rule list. Specify the address entry
and configure the new entry. Click "Apply"
9-4.2 Filtering Address Entry
This page provides address range settings used in IPMC profile .
The address entry is used to specify the address range that will be associated with IPMC
Profile. It is allowed to create at maximum 128 address entries in the system.
Web Interface
To configure the IPMC Profile Address Configuration in the web interface:
1.
Click Multicast, Multicast Filtering Profile and Filtering Address Entry.
2. Click “Add New Address (Range) Entry”.
3. Specify Entry Name, Start Address and End Address.
4. Click the apply to save the setting.