Evidence Cross-8/HPoE-10G, User Manual

Page: 117 / 321

6-3 Port Shapers
This section provides an overview of QoS Egress Port Shapers for all switch ports. Others the
user could get all detail information of the ports belong to the currently selected stack unit, as
reflected by the page header.
Web Interface
To configure the QoS Port Shapers in the web interface:
1. Click Quality of Service and Port Shapers.
2. Click the Port and display the Qos Egress Port Shapers.
3. Scroll the Port and Scheduler Mode and specify the Queue Shaper parameter.
4. Click the Apply to save the setting.
5. If you want to cancel the setting then you need to click the Reset button. It will revert
to previously saved values.
Figure 6-3: The QoS Egress Port Shaper
Parameter description:

Port :
The logical port for the settings contained in the same row.
Click on the port number in order to configure the shapers.

Shapers – Qn :
Shows disabled or actual queue shaper rate - e.g. "800 Mbps".

Shapers – Port :
Shows disabled or actual port shaper rate - e.g. "800 Mbps".

Scheduler Mode :
Controls how many of the queues are scheduled as strict and how many are scheduled as
weighted on this switch port.