Evidence Cross-8/HPoE-10G, User Manual

Page: 276 / 321

13-5 Alarm
13-5.1 Configuration
Configure RMON Alarm table on this page. The entry index key is ID.
Web Interface
To configure the RMON Alarm Configuration in the web interface:
1.
Click SNMP, Alarm and Configuration.
2. Click Add New Entry.
3. Specify the ID parameters.
4. Click Apply.
Figure 13-5.1: The RMON Alarm Configuration
Parameter description:
These parameters are displayed on the RMON Alarm Configuration page:

ID :
Indicates the index of the entry. The range is from 1 to 65535.

Interval :
Indicates the interval in seconds for sampling and comparing the rising and falling
threshold. The range is from 1 to 2^31-1.

Variable :
Indicates the particular variable to be sampled, the possible variables are:
InOctets:
The total number of octets received on the interface, including framing characters.
InUcastPkts:
The number of uni-cast packets delivered to a higher-layer protocol.
InNUcastPkts:
The number of broad-cast and multi-cast packets delivered to a higher-layer protocol.
InDiscards:
The number of inbound packets that are discarded even the packets are normal.