Evidence Cross-8/HPoE-10G, User Manual

Page: 63 / 321

Parameter description:

Port :
The switch port number.

LACP Enabled :
Controls whether LACP is enabled on this switch port. LACP will form an aggregation when
2 or more ports are connected to the same partner.

Key :
The Key value incurred by the port, range 1-65535 . The Auto setting will set the key as
appropriate by the physical link speed, 10Mb = 1, 100Mb = 2, 1Gb = 3. Using the Specific
setting, a user-defined value can be entered. Ports with the same Key value can participate
in the same aggregation group, while ports with different keys cannot.

Role :
The Role shows the LACP activity status. The Active will transmit LACP packets each second,
while Passive will wait for a LACP packet from a partner (speak if spoken to).

Timeout :
The Timeout controls the period between BPDU transmissions. Fast will transmit LACP
packets each second, while Slow will wait for 30 seconds before sending a LACP packet.

Prio :
The Prio controls the priority of the port. If the LACP partner wants to form a larger group
than is supported by this device then this parameter will control which ports will be active
and which ports will be in a backup role. Lower number means greater priority.
Buttons

Apply :
Click to save changes.

Reset :
Click to undo any changes made locally and revert to previously saved values.
3-5.3 System Status
This section describes that when you complete to set LACP function on the switch then it
provides a status overview for all LACP instances
Web Interface
To display the LACP System status in the web interface:
Click Port Management, Link Aggregation
and System Status.
Checked “Auto-refresh”.
1.
Click “Ref
resh” to refresh the port detailed statistics.