![Evidence Cross-8/HPoE-10G User Manual Download Page 13](http://html1.mh-extra.com/html/evidence/cross-8-hpoe-10g/cross-8-hpoe-10g_user-manual_2445999013.webp)
Chapter 1
Operation of Web-based Management
Initial
Configuration
This chapter instructs you how to configure and manage the
Cross-8/HPoE-10G
through the web user interface. With this
facility, you can easily access and monitor through any one port
of the switch all the status of the switch, including MIBs status,
each port activity, Spanning tree status, port aggregation status,
multicast traffic, VLAN and priority status, even illegal access
record and so on.
T
he default values of the Cross-8/HPoE-10G are listed in the table below:
IP Address
192.168.1.1
Subnet Mask
255.255.255.0
Default Gateway
192.168.1.254
Username
Admin
Password
1234
After the Cross-8/HPoE-10G has been finished configuration it interface, you can
browse it. For instance, type
in the address row in a browser, it
will show the following screen and ask you inputting username and password in
order to login and access authentication.
The default username is
“Admin”
and password is
1234
. For the first time to use,
please enter the default username and password, and then click the
<Login>
button.
The login process now is completed. In this login menu, you have to input the
complete username and password respectively, the Cross-8/HPoE-10G will not give
you a shortcut to username automatically. This looks inconvenient,
but safer.
In the Cross-8/HPoE-10G, allowed two or more users using administrator’s identity to
manage this switch, which administrator to do the last setting, it will be an available
configuration to effect the system.
N
OTE
:
When you login the Switch WEB page to manage. You must first type the
Username of the admin. Password was blank, so when you type after the
end Username, please press enter. Management page to enter WEB.
When you login Cross-8/HPoE-10G series switch Web UI management, you
can use both ipv4 ipv6 login to manage
To optimize the display effect, we recommend you use Microsoft IE 6.0
above, Netscape V7.1 above or Firefox V1.00 above and have the resolution
1024x768. The switch supported neutral web browser interface
3
Summary of Contents for Cross-8/HPoE-10G
