![Evidence Cross-8/HPoE-10G User Manual Download Page 177](http://html1.mh-extra.com/html/evidence/cross-8-hpoe-10g/cross-8-hpoe-10g_user-manual_2445999177.webp)
IGMPv2/MLDv1 Report's Received :
The number of Received IGMPv2 Join's and MLDv1 Report's, respectively.
IGMPv3/MLDv2 Report's Received :
The number of Received IGMPv3 Join's and MLDv2 Report's, respectively.
IGMPv2/MLDv1 Leave's Received :
The number of Received IGMPv2 Leave's and MLDv1 Done's, respectively.
Buttons
Figure 9-3.2: The MVR Statistics Information buttons
Auto-refresh :
Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
Refresh :
Click to refresh the page immediately.
Clear :
Clears all Statistics counters.
9-3.3 Groups Information
The section describes user could display the MVR Groups detail information on the switch.
Entries in the MVR Group Table are shown on this page. The MVR Group Table is sorted first
by VLAN ID, and then by group
Web Interface
To display the MVR Groups Information in the web interface:
1.
Click Multicast, MVR and Groups Information.
2.
If you want to auto-refresh the information then you need to evoke the “Auto-refresh”.
3.
To click the “Refresh” to refresh an entry of the MVR Groups Information.
4.
Click First/Next Page to change page.
Figure 9-3.3: The MVR Groups Information
Parameter description:
Navigating the MVR Channels (Groups) Information Table
Each page shows up to 99 entries from the MVR Group table, default being 20, selected
through the "entries per page" input field. When first visited, the web page will show the first
20 entries from the beginning of the MVR Channels (Groups) Information Table.
Summary of Contents for Cross-8/HPoE-10G
