Evidence Cross-8/HPoE-10G, User Manual

Page: 128 / 321

Parameter description:

Queue Priority :
Actual Class of Service.

DSCP DP0 :
Select the classified DSCP value (0-63) for Drop Precedence Level 0.

DSCP DP1 :
Select the classified DSCP value (0-63) for Drop Precedence Level 1.

DSCP DP2 :
Select the classified DSCP value (0-63) for Drop Precedence Level 2.

DSCP DP3 :
Select the classified DSCP value (0-63) for Drop Precedence Level 3.
Buttons

Apply :
Click to save changes.

Reset :
Click to undo any changes made locally and revert to previously saved values.
6-7.4 DSCP-Based QoS
The section will teach user to configure the DSCP-Based QoS mode that This page allows
you to configure the basic QoS DSCP based QoS Ingress Classification settings for all
switches.
Web Interface
To configure the DSCP –Based QoS Ingress Classification parameters in the web interface:
1. Click Quality of Service, DSCP and DSCP-Based QoS.
2. Evoke to enable or disable the DSCP for Trust.
3. Scroll to select Queue Priority and DPL parameters.
4. Click the save to save the setting.
5. If you want to cancel the setting then you need to click the Reset button. It will revert to
previously saved values.