Evidence Cross-8/HPoE-10G, User Manual

Page: 283 / 321

Chapter 14 MEP
14-1 MEP Configuration
The Maintenance Entity Point instances are configured here.
Web Interface
To configure the MEP parameters in the web interface:
1.
Click MEP.
2. Specify the Maintenance Entity Point parameters.
3. Click Apply to apply the change.
Figure 14-1: The Maintenance Entity Point
Parameter description:

Delete :
This box is used to mark a MEP for deletion in next Save operation.

Instance :
The ID of the MEP. Click on the ID of a MEP to enter the configuration page. The range is
from 1through 3124.

Domain :
Port: This is a MEP in the Port Domain.
VLAN: This is a MEP in the VLAN Domain. 'Flow Instance' is a VLAN. In case of Up-MEP the
VLAN must be created

Mode :
MEP: This is a Maintenance Entity End Point.
MIP: This is a Maintenance Entity Intermediate Point.

Direction :
Down: This is a Down MEP - monitoring ingress OAM and traffic on 'Residence Port'.
Up: This is a Up MEP - monitoring egress OAM and traffic on 'Residence Port'.

Residence Port :
The port where MEP is monitoring - see 'Direction'. For a EVC MEP the port must be a port
in the EVC. For a VLAN MEP the port must be a VLAN member.

Level :