Evidence Cross-8/HPoE-10G, User Manual

Page: 176 / 321

indicates Inactive; S indicates Source; R indicates Receiver. The default Role is Inactive.

Immediate Leave :
Enable the fast leave on the port.
Buttons

Add New MVR VLAN :
Click to add new mvr vlan. Specify MVR VID, MVR Name, IGMP Address, Mode, Tagging,
Priority, LLQI, Interface Channel Profile. Click "Apply"

Delete :
Check to delete the entry. The designated entry will be deleted during the next save.

Apply :
Click to save changes.

Reset :
Click to undo any changes made locally and revert to previously saved values.
9-3.2 Statistics
The section describes the switch will display the MVR detail Statistics after you had configured
MVR on the switch. It provides the detail MVR Statistics Information
Web Interface
To display the MVR Statistics Information in the web interface:
1. Click Multicast, MVR and Statistics.
2. If you want to auto-refresh the information then you need to evoke the “Auto-refresh”.
3. To click the “Refresh” to refresh an entry of the MVR Statistics Information.
Figure 9-3.2: The MVR Statistics Information
Parameter description:

VLAN ID :
The Multicast VLAN ID.

IGMP/MLD Queries Received :
The number of Received Queries for IGMP and MLD, respectively.

IGMP/MLD Queries Transmitted :
The number of Transmitted Queries for IGMP and MLD, respectively.

IGMPv1 Joins Received :
The number of Received IGMPv1 Join's.