Evidence Cross-8/HPoE-10G, User Manual

Page: 245 / 321

Parameter description:

ACE :
Indicates the ACE ID.

Ingress Port :
Indicates the ingress port of the ACE. Possible values are:
Any: The ACE will match any ingress port.
Policy: The ACE will match ingress ports with a specific policy.
Port: The ACE will match a specific ingress port.

Policy / Bitmask :
Indicates the policy number and bitmask of the ACE.

Frame Type :
Indicates the frame type of the ACE. Possible values are:
Any : The ACE will match any frame type.
EType : The ACE will match Ethernet Type frames. Note that an Ethernet Type based ACE will
not get matched by IP and ARP frames.
ARP : The ACE will match ARP/RARP frames.
IPv4 : The ACE will match all IPv4 frames.
IPv4/ICMP : The ACE will match IPv4 frames with ICMP protocol.
IPv4/UDP : The ACE will match IPv4 frames with UDP protocol.
IPv4/TCP : The ACE will match IPv4 frames with TCP protocol.
IPv4/Other : The ACE will match IPv4 frames, which are not ICMP/UDP/TCP.
IPv6 : The ACE will match all IPv6 standard frames.

Action :
Indicates the forwarding action of the ACE.
Permit : Frames matching the ACE may be forwarded and learned.
Deny : Frames matching the ACE are dropped.
Filter : Frames matching the ACE are filtered.

Rate Limiter :
Indicates the rate limiter number of the ACE. The allowed range is 1 to 16. When Disabled is
displayed, the rate limiter operation is disabled.

Port Redirect :
Indicates the port redirect operation of the ACE. Frames matching the ACE are redirected to
the port number. The allowed values are Disabled or a specific port number.
When Disabled is displayed, the port redirect operation is disabled.

Mirror :
Specify the mirror operation of this port. Frames matching the ACE are mirrored to the
destination mirror port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is "Disabled".