Evidence Cross-8/HPoE-10G, User Manual

Page: 278 / 321


Add New Entry :
Click to add a new entry.

Apply :
Click to save changes.

Reset :
Click to undo any changes made locally and revert to previously saved values.
13-5.2 Status
This page provides an overview of RMON Alarm entries. Each page shows up to 99 entries
from the Alarm table, default being 20, selected through the "entries per page" input field.
When first visited, the web page will show the first 20 entries from the beginning of the Alarm
table. The first displayed will be the one with the lowest ID found in the Alarm table.
The "Start from Control Index" allows the user to select the starting point in the Alarm table.
Clicking the Refresh button will update the displayed table starting from that or the next
closest Alarm table match.
The Next Entry will use the last entry of the currently displayed entry as a basis for the next
lookup. When the end is reached the text "No more entries" is shown in the displayed table.
Use the First Entry button to start over.
Web Interface
To display a RMON Alarm Status in the web interface:
1. Click SNMP, Alarm and Status.
2. Checked “Auto-refresh”.
3. Click “Refresh” to refresh the port detailed statistics.
4. Click First Entry/Next Entry to change Entry.
Figure 13-5.2: RMON Alarm Status
Parameter description:

ID :
Indicates the index of Alarm control entry.

Interval :
Indicates the interval in seconds for sampling and comparing the rising and falling
threshold.

Variable :