![Evidence Cross-8/HPoE-10G User Manual Download Page 25](http://html1.mh-extra.com/html/evidence/cross-8-hpoe-10g/cross-8-hpoe-10g_user-manual_2445999025.webp)
2-2.3.2 Routing Info Base
Each page shows up to 999 table entries, selected through the "entries per page" input field.
When first visited, the web page will show the beginning entries of this table.
Web Interface
To display the log configuration in the web interface:
1.
Click System, IP Addres, Status and Routing Info Base.
2.
Display the Routing Info Base information.
Figure 2-2.3.2: The Routing Information Base
Parameter description:
Start from ID :
Input field allow the user to change the starting point in this table.
Protocol :
The protocol of the route.
DHCP: The route is created by DHCP.
Connected: The destination network is connected directly.
Static: The route is created by user.
Network/Prefix
Network and prefix (example 10.0.0.0/16) of the given route entry.
NextHop
The IP address of nexthop. Value '0.0.0.0' indicates the link is directly connected.
Distance
The distance of the route.
Metric
The metric of the route.
Interface
The interface where the ip packet is outgoing.
Uptime (hh:ss:mm)
Summary of Contents for Cross-8/HPoE-10G
