There are four log types and possible types are:
None:
Log nothing.
Deny:
Log denied entries.
Permit:
Log permitted entries.
ALL:
Log all entries.
Check VLAN :
If you want to inspect the VLAN configuration, you have to enable the setting of "Check
VLAN". The default setting of "Check VLAN" is disabled. When the setting of "Check VLAN"
is disabled, the log type of ARP Inspection will refer to the port setting. And the setting of
"Check VLAN" is enabled, the log type of ARP Inspection will refer to the VLAN setting.
Possible setting of "Check VLAN" are:
Enabled: Enable check VLAN operation.
Disabled: Disable check VLAN operation.
Log Type :
Only the Global Mode and Port Mode on a given port are enabled, and the setting of
"Check VLAN" is disabled, the log type of ARP Inspection will refer to the port setting.
There are four log types and possible types are:
None:
Log nothing.
Deny:
Log denied entries.
Permit:
Log permitted entries.
ALL:
Log all entries.
Buttons
Apply :
Click to save changes.
Reset :
Click to undo any changes made locally and revert to previously saved values.
Translate dynamic to static :
Click to translate all dynamic entries to static entries.
11-4.2 VLAN Configuration
Specify ARP Inspection is enabled on which VLANs
Web Interface
To configure a VLAN Mode Configuration in the web interface:
1.
Click Security, ARP Inspection and
VLAN Configuration.
Click “Add new entry”.
Specify the VLAN ID, Log Type.
Click Apply.
Click First Entry/Next Entry to change Entry.
Summary of Contents for Cross-8/HPoE-10G
