Evidence Cross-8/HPoE-10G, User Manual

Page: 41 / 321

Displays the system description.

Management Address :
Management Address is the neighbour unit's address that is used for higher layer entities
to assist discovery by the network management. This could for instance hold the
neighbour's IP address.
Buttons
Figure 2-4.3: The LLDP Neighbor buttons

Auto-refresh :
Check this box to refresh the page automatically. Automatic refresh occurs every
3
seconds.

Refresh :
Click to refresh the page immediately.
2-4.4 LLDP-MED Neighbour
This page provides a status overview of all LLDP-MED neighbours. The displayed table
contains a row for each port on which an LLDP neighbour is detected. This function applies to
VoIP devices which support LLDP-MED. The columns hold the following information:
Web Interface
To show LLDP-MED neighbor:
1. Click System, LLDP and LLDP-MED Neighbour.
2. Click Refresh for manual update web screen.
3. Click Auto-refresh for auto-update web screen.
Figure 2-4.4: The LLDP-MED Neighbour information
N
OTE
: If there is no device that supports LLDP-MED in your
network then the table will show “No LLDP-MED neighbour
information found”.
Parameter description

Port :
The port on which the LLDP frame was received.

Device Type :
LLDP-MED Devices are comprised of two primary Device Types: Network Connectivity