Evidence Cross-8/HPoE-10G, User Manual

Page: 163 / 321

Web Interface
To display the IGMP SFM Information in the web interface:
1. Click Multicast, IGMP Snooping and IGMP SFM Information
2. If you want to auto-refresh the information then you need to evoke the “Auto-refresh”.
3. Click “Refresh” to refresh an entry of the IGMP Snooping Groups Information.
4. Click First/Next Page to change page.
Figure 9-1.5: The IGMP SFM Information
Parameter description:
Navigating the IGMP SFM Information Table
Each page shows up to 99 entries from the IGMP SFM Information table, default being 20,
selected through the "entries per page" input field. When first visited, the web page will
show the first 20 entries from the beginning of the IGMP SFM Information Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point
in the IGMP SFM Information Table. Clicking the Refresh button will update the displayed
table starting from that or the closest next IGMP SFM Information Table match. In addition,
the two input fields will - upon a Refresh button click - assume the value of the first
displayed entry, allowing for continuous refresh with the same start address.
The Next Page will use the last entry of the currently displayed table as a basis for the next
lookup. When the end is reached the text "No more entries" is shown in the displayed
table. Use the First Page button to start over.

Show entries :
You can choose how many items you want to show up.

VLAN ID :
VLAN ID of the group.

Group :
Group address of the group displayed.

Port :
Switch port number.

Mode :
Indicates the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It
can be either Include or Exclude.

Source Address :
IP Address of the source. Currently, system limits the total number of IP source addresses
for filtering to be 128.