![Evidence Cross-8/HPoE-10G User Manual Download Page 133](http://html1.mh-extra.com/html/evidence/cross-8-hpoe-10g/cross-8-hpoe-10g_user-manual_2445999133.webp)
can enter either a specific value or a range of VIDs.
Inner PCP
Valid value of Inner PCP are specific (0, 1, 2, 3, 4, 5, 6, 7) or range (0-1, 2-3, 4-5,
6-7,
0-3,
4-7)
or
'Any'.
Inner DEI
Valid value of Inner DEI can be '0', '1' or 'Any'.
Frame Type
Frame Type can have any of the following values:
Any
EtherType
LLC
SNAP
IPv4
IPv6
Note: All frame types are explained below.
Any :
Allow all types of frames.
EtherType :
Ether Type
Valid Ether Type can be 0x600-0xFFFF excluding 0x800(IPv4) and 0x86DD(IPv6)
or 'Any'.
LLC :
DSAP Address
Valid DSAP(Destination Service Access Point) can vary from 0x00 to 0xFF or
'Any'.
SSAP Address
Valid SSAP(Source Service Access Point) can vary from 0x00 to 0xFF or 'Any'.
Control
Valid Control field can vary from 0x00 to 0xFF or 'Any'.
SNAP :
PID
Valid PID(a.k.a Ether Type) can be 0x0000-0xFFFF or 'Any'.
IPv4 :
Protocol
IP protocol number: (0-255, 'TCP' or 'UDP') or 'Any'.
Source IP
Specific Source IP address in value/mask format or 'Any'. IP and Mask are in the
format x.y.z.w where x, y, z, and w are decimal numbers between 0 and 255. When Mask is
converted to a 32-bit binary string and read from left to right, all bits following the first
zero
must
also
be
zero.
Destination IP
Specific Destination IP address in value/mask format or 'Any'.
IP Fragment
IPv4 frame fragmented option: 'Yes', 'No' or 'Any'.
DSCP
Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'.
DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43.
Sport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP
protocol
UDP/TCP.
Dport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP
protocol UDP/TCP.
IPv6 :
Protocol
IP protocol number: (0-255, 'TCP' or 'UDP') or 'Any'.
Source IP
32 LS bits of IPv6 source address in value/mask format or 'Any'.
Destination IP
Specific Destination IP address in value/mask format or 'Any'.
DSCP
Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'.
DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43.
Sport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP
protocol
UDP/TCP.
Dport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP
protocol UDP/TCP.
Summary of Contents for Cross-8/HPoE-10G
