Evidence Cross-8/HPoE-10G, User Manual

Page: 241 / 321

Chapter 12 Access Control
12-1 Ports Configuration
Configure the ACL parameters ( ACE ) of each switch port. These parameters will affect frames
received on a port unless the frame matches a specific ACE.
Web Interface
To configure the ACL Ports Configuration in the web interface:
1. Click Access Control and Port Configuration.
2. To scroll the specific parameter value to select the correct value for port ACL setting.
3. Click the apply to save the setting
4. If you want to cancel the setting then you need to click the reset button. It will revert to
previously saved values.
5. After you configure complete then you could see the Counter of the port. Then you could
click refr esh to update the counter or Clear the information.
Figure 12-1: The ACL Ports Configuration
Parameter description:

Port :
The logical port for the settings contained in the same row.

Policy ID :
Select the policy to apply to this port. The allowed values are 1 through 8. The default value
is 1.

Action :