Evidence Cross-8/HPoE-10G, User Manual

Page: 263 / 321

enter the group information then check <Apply>. Max Group Number:12.
Web Interface
To configure SNMP Groups in the web interface:
1. Click SNMP, SNMPv3 and Groups.
2. Click Add new entry.
3. Specify the SNMP group parameter.
4. Click Apply.
Figure 13-2.3: The SNMP Groups Configuration
Parameter description:

Security Model :
Indicates the security model that this entry should belong to. Possible security models are:
v1 : Reserved for SNMPv1.
v2c : Reserved for SNMPv2c.
usm : User-based Security Model (USM).

Security Name :
A string identifying the security name that this entry should belong to. The allowed string
length is 1 to 31, and the allowed content is ASCII characters from 33 to 126.

Group Name :
A string identifying the group name that this entry should belong to. The allowed string
length is 1 to 32, and the allowed content is ASCII characters from 33 to 126.