Evidence Cross-8/HPoE-10G, User Manual

Page: 161 / 321

Router Port
Display which ports act as router ports. A router port is a port on the Ethernet switch that
leads towards the Layer 3 multicast device or
IGMP querier . Static denotes the specific port
is configured to be a router port. Dynamic denotes the specific port is learnt to be a router
port. Both denote the specific port is configured or learnt to be a router port.

Port :
Switch port number.

Status :
Indicate whether specific port is a router port or not.
Buttons
Figure 9-1.3: The IGMP Snooping Status buttons

Auto-refresh :
Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.

Refresh :
Click to refresh the page immediately.

Clear :
Click to clear the page.
9-1.4 Group Information
After you complete to set the IGMP Snooping function then you could let the switch to
display the IGMP Snooping Group Information. Entries in the IGMP Group Table are shown on
this page. The IGMP Group Table is sorted first by VLAN ID, and then by group. This will use
the last entry of the currently displayed table as a basis for the next lookup. When the end is
reached the text "No more entries" is shown in the displayed table. Use the button to start
over.
Web Interface
To display the IGMP Snooping Group Information in the web interface:
1. Click Multicast, IGMP Snooping and Group Information.
2. Specify how many entries to show in one page.
3. If you want to auto-refresh the information then you need to evoke the “Auto-refresh”.
4. Click “Refresh” to refresh an entry of the IGMP Snooping Groups Information.
5. Click First/Next Page to change page.