Evidence Cross-8/HPoE-10G, User Manual

Page: 166 / 321

7. If you want to cancel the setting then you need to click the Reset button. It will revert to
previously saved values.
Figure 9-2.1: The MLD Snooping Basic Configuration
Parameter description :
Global Configuration

Snooping Enabled :
Enable the Global MLD Snooping.

Unregistered IPMCv6 Flooding enabled :
Enable unregistered IPMCv6 traffic flooding.
The flooding control takes effect only when MLD Snooping is enabled.
When MLD Snooping is disabled, unregistered IPMCv6 traffic flooding is always active in
spite of this setting.

MLD SSM Range :
SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers run the
SSM service model for the groups in the address (Using IPv6 Address) range.

Leave Proxy Enabled :
Enable MLD Leave Proxy. This feature can be used to avoid forwarding unnecessary leave
messages to the router side.

Proxy Enabled :
Enable MLD Proxy. This feature can be used to avoid forwarding unnecessary join and leave
messages to the router side.
Port Related Configuration

Router Port :
Specify which ports act as router ports. A router port is a port on the Ethernet switch that
leads towards the Layer 3 multicast device or MLD querier. If an aggregation member port
is selected as a router port, the whole aggregation will act as a router port.

Fast Leave :
To evoke to enable the fast leave on the port.

Throttling :