Evidence Cross-8/HPoE-10G, User Manual

Page: 202 / 321


none : authorization is disabled and login is not possible.

tacacs : use a remote server for authorization.

Cmd Lvl :
Runs authorization for all commands at the specified privilege level. Specific command
level that should be authorized. Valid entries are 0 through 15.

Cfg Cmd :
Enable or disable the configure command.

Fallback :
The local database can act as a fallback method for several functions. This behavior is
designed to help you prevent accidental lockout from the security appliance.
Accounting Method Configuration

Client :
The management client for which the configuration below applies.

Method :
Accounting Method can be set to one of the following values:

none : accounting is disabled and login is not possible.

tacacs : use a remote server for accounting.

Cmd Lvl :
Runs accounting for all commands at the specified privilege level. Specific command level
that
should be authorized. Valid entries are
0 through 15.

Exec :
Runs accounting to determine if the user is allowed to run an EXEC shell. This facility might
return user profile information such as auto command information.
Buttons

Apply :
Click to save changes.

Reset :
Click to undo any changes made locally and revert to previously saved values.
11-1.4 Access Method
This section shows you to configure access management table of the Switch including
HTTP/HTTPS, SNMP, and TELNET/SSH. You can manage the Switch over an Ethernet LAN, or
over the Internet.
Web Interface
To configure an Access Method Configuration in the web interface:
1.
Click Security, Management and Access Method.
2. Select “on” in the Mode of Access Management Configuration.