Summa Series Servodrive Product Manual
Trial Operation
Document Version: V1.01
(Dec, 2019)
© 2019 ESTUN Automation Co., Ltd. All right reserved.
8-12
Step 4
Set the relevant parameters for the operation patterns PJOG0 and PJOG1.
Rotation Number
: Set the numbers of rotation the Motor will run in the operation pattern PJOG0 or
PJOG1.
NOTE
: The Motor can be run in reverse when this parameter is set to a negative value.
Rotation Speed
: Set the Motor running speed in the operation pattern PJOG0 or PJOG1.
Acceleration/Deceleration Time
: Set the time it takes for the Motor runs to
Rotation Speed
or the
Motor stops from
Rotation Speed
.
Stop Time
: Set the hold time when the Motor stops running in the operation pattern PJOG0 or
PJOG1, and then switches to the other operation pattern.
Step 5
Click
Apply
to complete the settings.
Step 6
Click
Servo Off
/
Servo On
for supplying power to the Motor.
Step 7
Click
Run
.
The Motor will be run between the operation patterns
PJOG0
and
PJOG1
.
Click
Stop
for stopping the Motor running.
The Motor can be stopped when you close
ESView V4
or
PJOG
window.
