Epson WF-C878R Series, User Manual

Page: 283 / 541

Straight Lines Appear when Sending Faxes from the ADF
There is dust or dirt on the ADF or originals.
Solutions
Clean the ADF, and remove any dust or dirt that adheres to the originals.
&
“Cleaning the ADF” on page 174
The Image Quality of the Sent Fax is Poor
The following causes can be considered.
The Original Type setting is wrong.
Solutions
Select Fax > Fax Settings > Scan Settings > Original Type , and then change the setting. When the
original you are sending contains text and images, set this to Photo .
The resolution is set to low.
Solutions
If you do not know the performance of the sender’s fax machine, set the following before sending a fax.
❏
Select Fax > Fax Settings and then make the Resolution setting to set the highest quality image.
❏
Select Fax > Fax Settings and then enable Direct Send .
Note that if you set
Resolution
to
Super Fine
or
Ultra Fine
but you send the fax without enabling
Direct Send , the fax may be sent at a lower resolution.
ECM setting is disabled.
Solutions
Select Settings > General Settings > Fax Settings > Basic Settings and enable the ECM setting on the
control panel. This may clear errors that occur due to connection problems. Note that the speed of
sending and receiving faxes may be slower than when
ECM is disabled.
Solving Problems
>
Printing, Copying, Scanning, and Faxing Quality is Poor
>
The Quality of the Sent Fax is Poor
283