Epson RC420, Manual

Page: 163 / 172

Maintenance 12. Recovering the HDD
(6) Check the [Share this folder on the network] check box in the [Network sharing and
security] group box and click the <OK> button.
12.3.3 Network Configuration
Configure the network to use “NetBEUI” protocol in RC420 and your PC.
For RC420, refer to the procedure from step (2) in
5. Windows XP . Procedure in step (1)
is already configured at shipment.
For your PC, refer to the applicable section according to Windows version installed in
your PC.
1. Windows 95
(1) Double-click the <My computer> - <Control Panel> - <Network> icons.
(2) Select the [Configuration] tab in the [Network] dialog.
(3) Confirm that the “NetBEUI” exists.
If the “NetBEUI” exists, click the <OK> button and finish the network configuration.
If the “NetBEUI” doesn’t exist, click the <Add> button.
(4) Select the [Protocol] in the [Select Network Component Type] dialog and click the
<Add> button.
(5) Select the “Microsoft” for the [Manufactures] and the “NetBEUI” for the [Network
Protocols]. Then, click the <OK> button.
(6) Confirm that the “NetBEUI” is added in the [Configuration] panel in the [Network]
dialog. Then, click the <OK> button.
2. Windows 98
(1) Double-click the <My computer> - <Control Panel> - <Network> icons.
(2) Select the [Configuration] tab in the [Network] dialog.
(3) Confirm that the “NetBEUI” exists.
If the “NetBEUI” exists, click the <OK> button and finish the network configuration.
If the “NetBEUI” doesn’t exist, click the <Add> button.
(4) Select the [Protocol] in the [Select Network Component Type] dialog and click the
<Add> button.
RC420 Rev.9 153