Maintenance 10. Replacing Maintenance Parts
RC420 Rev.9
139
10.3 HDD
CAUTION
■
Do not shock, shake, or drop the HDD during maintenance. When the HDD is
shocked physically, it may be damaged and may also cause data loss during
data loading/saving.
Back up the necessary data of the project and system before replacing the HDD. Then,
restore the data of the project and system after the replacement.
The details of data backup/restore are described in the Maintenance
2.5Backup of Data.
(1) Shut down Windows. Turn OFF the Controller.
(2) Open the front panel door.
(3) Insert the key to the HDD key lock and turn the key to the right.
HDD Key Lock
(4) Pull out the HDD.
(5) Install a new HDD.
(6) Insert the key to the HDD key lock and turn the key to the left.
Refer to the instructions supplied with the new HDD for new hard disk settings.
)
NOTE
)
NOTE
Summary of Contents for RC420
