Epson EPL-6100 Reference Manual Download

Page: 95 / 277

Using the Printer Driver with Macintosh

4. Type the file name in the Name box, and click

Add Text

5. Type the watermark text in the Text box, and select the Font

and Style, and then click

6. Click

Save

Note:

❏

To edit the saved text watermark, select it from List, and click

Edit Text

. After editing, be sure to click

to close the dialog

box.

❏

To remove the saved text watermark, select it from List, and
click

Delete

. After editing, be sure to click

Save

to close the

dialog box.

7. Click

on the Layout dialog box. The saved watermark is

displayed on the preview window.

To make a bitmap watermark, follow the instructions below:

Summary of Contents for EPL-6100






















































































































































































































































































Search results

Summary of Contents for EPL-6100

Reviews:

Related manuals for EPL-6100

Brands by name

Popular brands

Epson EPL-6100, Reference Manual

Search results

Summary of Contents for EPL-6100

Reviews:

Related manuals for EPL-6100

Brands by name

Popular brands