Epson EPL-6100 Reference Manual Download

Page: 132 / 277

Installing and Removing Options

1. Turn off the printer.

2. Unplug the printer’s power cord from the electrical outlet.

3. Unpack the interface card and remove all protective

materials.

4. Face the rear of the printer.

5. Remove the two screws that secure the interface slot cover

and remove the cover.

Caution

❏

Make sure that the printer is turned off.

❏

Remove only two screws attaching the right side cover.

Warning:

❏

Removing other screws and covers will expose high
voltage areas.

❏

Be careful when working inside the printer as some
components are sharp and may cause injury.

Summary of Contents for EPL-6100






















































































































































































































































































Search results

Summary of Contents for EPL-6100

Reviews:

Related manuals for EPL-6100

Brands by name

Popular brands

Epson EPL-6100, Reference Manual

Search results

Summary of Contents for EPL-6100

Reviews:

Related manuals for EPL-6100

Brands by name

Popular brands