Epson EPL-6100 Reference Manual Download

Page: 54 / 277

Using the Printer Driver with Windows

❏

To access the EPSON Status Monitor 3 from Windows, click

Start

, point to

Settings

, and click

Printers

. Next, right-click

The

EPL-6100 advanced

icon and click

Properties

(in

Windows Me, 98, or 95),

Printing Preferences

(in Windows

XP or 2000) or

Document Defaults

(in Windows NT 4.0).

Then click the

Utility

tab, and click the

EPSON Status Monitor

icon to start the EPSON Status Monitor 3.

Note:
Do not clear the

Monitor the printing status

check box. If you clear the

check box, the Status Alert window no longer comes up to notify you
when an error occurs and your printer may not recover from some errors.

Summary of Contents for EPL-6100






















































































































































































































































































Search results

Summary of Contents for EPL-6100

Reviews:

Related manuals for EPL-6100

Brands by name

Popular brands

Epson EPL-6100, Reference Manual

Search results

Summary of Contents for EPL-6100

Reviews:

Related manuals for EPL-6100

Brands by name

Popular brands