Epson EPL-6100, Reference Manual

Page: 257 / 277

Working with Fonts
155
B
B
B
B
B
B
B
B
B
B
B
B
❏
The height of the bar code is automatically adjusted to 15% or
more of its total length, in conformance to the Code128
standard. For this reason, it is important to keep at least one
space between the bar code and the surrounding text to
prevent overlapping.
❏
Some application software automatically deletes the spaces at
the end of lines or changes multiple spaces into tabs. Bar codes
containing spaces may not be correctly printed from
applications that automatically delete spaces from the ends of
lines or change multiple spaces into tabs.
❏
When printing two or more ba rcodes on one line, separate
the bar codes with a tab, or select a font other than a BarCode
Font and input the space. If a space is input while Code128 is
selected, the bar code will not be correct.
The following codes are inserted automatically and need not be
input by hand:
❏
Left/Right quiet zone
❏
Start/Stop character
❏
Check digit
❏
Change code set character
Character type All ASCII characters (95 in total)
Number of characters No limit
Font size 26 pt to 104 pt (up to 96 pt in Windows XP,
2000, and NT 4.0). Recommended sizes are
26 pt, 52 pt, 78 pt and 104 pt.