Epson EPL-6100 Reference Manual Download

Page: 213 / 277

Troubleshooting

111

5. Reinstall the photoconductor unit, and then the developer

cartridge.

6. Close the printer cover.

7. Tap the edges of the stack of paper on a flat surface and

carefully reload it into the MP tray. (Do not reload curled or
wrinkled sheets.)

Printing automatically restarts from the page that jammed. If the

Error

light (red) continues flashing after removing all jammed

paper, open and close the printer cover to clear the error.

Paper jam - MP tray

The following illustration shows what this type of jam looks like:

Follow the steps below to clear a feed jam at the MP tray:

Summary of Contents for EPL-6100






















































































































































































































































































Search results

Summary of Contents for EPL-6100

Reviews:

Related manuals for EPL-6100

Brands by name

Popular brands

Epson EPL-6100, Reference Manual

Search results

Summary of Contents for EPL-6100

Reviews:

Related manuals for EPL-6100

Brands by name

Popular brands