Epson EB-L1050U User Manual Download

Page: 21 / 291

Name

Function

[

][

]

buttons

•

Press to adjust focus, zoom, distortion, and lens shift.

"Adjusting the Position of the Projected Image

(Lens Shift Adjustment)"

p.34

"Adjusting the Image Size"

p.37

"Correcting the Focus"

p.38

•

When the Configuration menu or the Help screen is
displayed, pressing these buttons selects menu items
and setting values.

"Configuration Menu Operations"

p.136

[

] button

When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.

"Configuration Menu Operations"

p.136

[A/V Mute] button

Turns the video and audio on or off.

"Hiding the Image and Sound Temporarily (A/V

Mute)"

p.102

[Page] buttons
[

[

][

]

•

Press to change the test pattern while a test pattern is
displayed.

•

Moves to the previous or next image file when
projecting images from a computer connected via a
network.

[Volume] buttons

[

][

]

[

] decreases the volume.

[

] increases the volume.

"Adjusting the Volume"

p.63

[ ] button

Displays the Info menu from the Configuration menu.

"Info Menu (Display Only)"

p.161

[User1] button
[User2] button
[User3] button

Select any frequently used item from the Configuration
menu items, and assign it to any of these buttons. By
pressing the button, the assigned menu item selection/
adjustment screen is displayed, allowing you to make one-
touch settings/adjustments.

"Settings Menu"

p.143

Name

Function

Numeric buttons

•

Enter the Password.

"Setting Password Protection"

p.115

•

Use this button to enter numbers in

Network

settings

from the Configuration menu.

[ID] button

Hold down this button and press the numeric buttons to
select the ID for the projector you want to operate using
the remote control.

"ID Settings"

p.42

[ID] switch

Use this switch to enable (On)/disable (Off) ID settings for
the remote control.

"ID Settings"

p.42

Remote port

Connects the optional remote control cable set and
outputs signals from the remote control.

"Optional Accessories"

p.233

When the remote control cable is plugged into this remote
port, the remote control light-emitting is disabled.

[

] button

Displays and closes the Home screen.

"Home Screen"

p.59

[Num] button

Hold down this button and press the numeric buttons to
enter passwords and numbers.

"Setting Password Protection"

p.115

[Geometry] button

Corrects distortion in the projected image.

"Correcting Distortion in the Projected Image"

p.64

[Memory] button

Performs operations and makes settings for the memory
function.

"Memory Function"

p.110

[E-Zoom] buttons
[

][

]

Enlarges or reduces the image without changing the
projection size.

"Enlarging Part of the Image (E-Zoom)"

p.104

Part Names and Functions

Summary of Contents for EB-L1050U




































































































































































































































































































Search results

Summary of Contents for EB-L1050U

Reviews:

Related manuals for EB-L1050U

Brands by name

Popular brands

Epson EB-L1050U, User Manual

Search results

Summary of Contents for EB-L1050U

Reviews:

Related manuals for EB-L1050U

Brands by name

Popular brands