a
Before performing edge blending to raise the precision of adjustments,
press the [Color Mode] button on the remote control, and then set
Color Mode
to
Multi-Projection
.
a
Press the [Menu] button while projecting.
b
Select
Multi-Projection
from
Extended
.
c
Select
Edge Blending
, and then press the [
] button.
The following screen is displayed.
Submenu
Function
Edge Blending
Set to
On
to activate Edge Blending. Set to
Off
when not projecting from multiple projectors.
Submenu
Function
Top Edge/Bottom
Edge/Left Edge/Right
Edge
Blending
: Set to
On
to activate Edge Blending
towards your settings, and the blend range will be
shaded.
Blend Start Position
: Displays blending start
position as a red line, and adjusts at the level of one
pixel.
Blend Range
: Adjusts the range to be shaded.
Adjustment is possible at the level of one pixel. The
maximum range is 45% of the resolution.
Blend Curve
: Select how to apply shading.
Line Guide
Set to
On
to display a guide on the Edge Blending
setting range.
Pattern Guide
Set to
On
to display a lattice pattern to match the
position of the Edge Blending setting range.
Guide Color
Select a combination of guide colors.
d
Turn on Edge Blending.
(1)
Select
Edge Blending
, and then press the [
] button.
(2)
Select
On
, and then press the [
] button.
(3)
Press the [Esc] button.
e
Set
Line Guide
to
On
.
(1)
Select
Line Guide
, and then press the [
] button.
(2)
Select
On
, and then press the [
] button.
(3)
Press the [Esc] button.
a
If the guide is not clear, you can change the color of the guide
in
Guide Color
.
Multi-Projection Function
92
Summary of Contents for EB-L1050U
