Epson EB-L1050U, User Manual

Page: 141 / 291

Submenu Function
Image Enhance-
ment
You can adjust the image resolution.
s
"Adjusting Image Resolution (Image Enhancement)"
p.83
4K Enhancement
*
: (EB-L1075U/EB-L1070U/EB-L1065U/EB-
L1060U/EB-L1050U only) You can project at a doubled
resolution.
Image Preset Mode : You can select the optimal setting
according to the projected image from five presets prepared
in advance.
Frame Interpolation : You can play fast moving images
smoothly by producing intermediate frames between the
original frames.
Deinterlacing : (Only when the input signal is 480i, 576i, or
1080i) You can convert interlace signals into progressive
signals. (IP conversion)
Off is ideal for images with a large amount of movement,
Video for general video images, and Film/Auto for movie
films, computer graphics, and animation.
Noise Reduction : You can smooth out the roughness in
progressive images.
MPEG Noise Reduction : You can reduce dot and block
noise that occurs in outlines when projecting MPEG movies.
Super-resolution : To display a crisp image, you can reduce
the blurring that is created on the edge when the resolution
of the image signal is scaled up and projected.
Detail Enhancement : You can enhance the contrast of
details in an image.
Reset : Returns the selected preset to its defaults.
Advanced You can make adjustments by choosing the following items.
Gamma : You can adjust the coloring by selecting one of the
gamma correction values, or referring to the projected
graph.
RGBCMY : You can adjust the hue, saturation, and
brightness of each color R (red), G (green), B (blue), C
(cyan), M (magenta), Y (yellow) individually.
Submenu Function
Light Source
Control
Light Source Control : Select the light source operations
according to the image signal.
s
"Setting the Amount of Light of the Projected Image"
p.79
Dynamic Contrast : (This can only be set if Light Source
Control is set to Dynamic Contrast ) Automatically adjusts
the amount of light when projecting according to the
brightness of the image.
Lights-Out Control : (This can only be set if Light Source
Control is set to Lights-Out Control ) Automatically turns
off the light after the set time has elapsed at the specified
video level.
Reset You can reset all adjustment values for the Image menu to
their default settings. See the following to return all menu
items to their default settings.
s
"Reset Menu" p.162
* This cannot be set when Aspect is set to Native .
List of Functions
141