Epson EB-L1050U, User Manual

Page: 3 / 291

Make sure you read the following before you use the projector.
s
Safety Instructions
Warning and Cautions on Installation
An optional ceiling mount is required when suspending the projector from
a ceiling.
s
"Optional Accessories" p.233
Warning
•
Do not use or install the projector where it may be subject to water or rain,
or high humidity, such as outdoors, in a bathroom, or shower room, and so
on. Otherwise, it could cause a fire or electric shock.
•
Do not install in locations where salt damage could occur, or in locations
subject to corrosive gas such as sulphuric gas from hot springs.
Otherwise, corrosion could cause the projector to fall. It could also cause the
projector to malfunction.
•
A special method of installation is required when suspending the projector
from a ceiling (ceiling mount). If installation work is not carried out
correctly, the projector could fall down. This may result in injury or
accidents. Contact your local dealer or the nearest address provided in the
Epson Projector Contact List.
s
Epson Projector Contact List
•
Failure to install the ceiling mount and projector may cause the projector to
fall. After installing the specific Epson mount that supports your projector,
make sure you secure the projector and the mount using wire that is strong
enough to hold their weight.
•
If you use adhesives on the ceiling mount fixing points to prevent the screws
from loosening, or if you use things such as lubricants or oils on the
projector, the projector case may crack causing it to fall from its ceiling
mount. This could cause an accident or injury to anyone under the ceiling
mount.
When installing or adjusting the ceiling mount, do not use adhesives,
lubricants, oils, and so on to prevent the screws from loosening.
Warning
•
Do not install the projector in locations subject to high humidity or dust, or
locations subject to oil or steam, such as kitchen counters, kitchens, or near
humidifiers. Otherwise, electric shock or fire could occur. Also, oily particles
in the air could cause the projector case to deteriorate causing the projector
to fall from the mount if it is suspended from a ceiling.
•
Do not cover the projector's air intake vent or air exhaust vent. If either of
the vents are covered, the internal temperature could rise and cause a fire.
•
Do not place flammable objects in front of the lens. If you set the schedule to
turn on the projector automatically, any flammable objects placed in front of
the lens could cause a fire.
•
Do not tie the power cord and other connection cables together. Otherwise, it
could cause a fire.
•
Only use the specified power-supply voltage. Otherwise, it could cause a fire
or electric shock.
Safety Warning and Cautions
3