Emerson 2130 RBM Consultant Pro, Reference Manual

Page: 115 / 394

3-35 Laser Address Selection
Job Manager Function Keys
Create New Job
Use the Create New Job key to create a new default horizontal job and advance you
to the Edit Job screen. Refer to the Edit Job Setup section on page 3-38 for more
information.
Change Location
Use the Change Location key to change the memory location where jobs are
stored. This key is only active if at least one external memory card is installed in the
analyzer.
Edit This Job
Use the Edit This Job key to advance to the Edit Job screen. Jobs may be edited from
here. If the highlighted job is not the active job, then it is made the active job before
advancing to the Edit Job screen. Refer to the Edit Job Setup section on page 3-38
for more information.
Select/Unselect
Use the Select/Unselect key to choose the highlighted job (place a check mark just
to the left of the job name). If the job has already been selected, clear the check-
mark to remove the job. (This operation does not delete the job).
Select/Unselect All
Use the Select/Unselect All key to select all jobs (place a check mark just to the left
of all job names) and remove all jobs(clear all check marks). (This operation does
not delete the job).
Delete Selected Jobs
Use the Delete Selected Jobs key to delete the selected jobs. Before any job is
deleted, a warning message displays asking if this is the operation you desire to per-
form. If you answer yes, then the selected jobs will be deleted. If you answer no, then
the operation is aborted. This key is only active when at least one job has been
selected.