Emerson 2130 RBM Consultant Pro, Reference Manual

Page: 94 / 394

3-14 Horizontal Alignment
Tolerance Type
Use the Tolerance Type key to toggle the alignment tolerance type between the
only two options available in Basic mode: Standard (default) and Jackshaft. Refer
to the Tolerance Type section on page 3-22 and the Tolerances section on page
3-193 for more information. In Basic mode:
• When Standard is selected, the Estimate F Dim option can not be changed;
therefore, it is not available. All basic horizontal jobs allow the program to
estimate the F dimension to be one half of the C dimension.
Exit Laser Align
Use the Exit Laser Align key to exit the Laser Alignment program and advance you
to the 2130 analyzer’s Home screen.
Laser Config
Use the Laser Config key to advance to the Laser Configuration screen where the
laser head and analyzer addresses can be reviewed and set. Refer to the Laser Con-
figuration section on page 3-23 for more information. In Basic mode:
• The Laser Head A and B locations can not be changed; therefore, the
option to do so is not available. For all basic horizontal jobs, Laser Head A
must be located on the left machine and Laser Head B must be located on
the right machine.
Job Manager
Use the job Manager key to advance to the Job Manager screens where a new job
can be created from scratch using default job setups, a new job can be created using
the job setup from an existing job, selected alignment jobs can be deleted from the
analyzer, and jobs can be transferred to and from the PC. Refer to the Job Manager
section on page 3-34 for more information. In Basic Laser Align application:
• Jobs can not be transferred to and from the PC; therefore, the option to do
so is not available.
• The alignment tolerance table can not be transferred from the PC into the
analyzer. All Basic Horizontal jobs created in the Basic Laser Align applica-
tion use the CSI default tolerance values available in the analyzer.
• Only Basic Horizontal jobs can be created; therefore, the option to create,
other types of jobs (e.g. Advanced Horizontal, Vertical, and Straightness
jobs) is not available.