Emerson 2130 RBM Consultant Pro, Reference Manual

Page: 291 / 394

4-5
The steps required to perform an alignment are displayed in the center portion of
the main screen. The 2130 Laser Align program leads you through each step of a
routine alignment procedure starting with the Enter Dimensions selection at the
Main screen. Once an alignment job has started the next uncompleted step in the
recommended procedure is highlighted.
An [X] signifies a completed step. As you complete steps, the next recommended
step is highlighted. Initially, the Move Machine step is displayed, but grayed out
until you’ve completed the first two required steps which are critical to the align-
ment job.
Up and Down Arrow keys
Use the Up and Down Arrow keys to highlight each feature. If you select an inactive
step, a popup message reminds you that the selected step is inactive due to missing
information.
Three Step Alignment
To simulate the basic steps required to complete a vertical alignment job, the 2130
Laser Align main screen is set up to allow an alignment job to be performed using
the following three steps:
1 Enter Dimensions
• Enter machine dimensions.
2 Sweep Laser Heads
• Acquire alignment data to determine the alignment condition of the
machine.
3 Move Machine
• Review angular moves.
• Review offset moves.
• Perform a live move and move machine.