Emerson 2130 RBM Consultant Pro, Reference Manual

Page: 204 / 394

3-124 Horizontal Alignment
Enter key
Use the Enter key to save the average reading set and advance to the tolerance plot
screens where graphical representations of the alignment condition can be
reviewed.
Note
If any reading used to calculate an average reading set was acquired
using Auto Sweep, Manual Sweep, or Dual Pass, the associated sine fit
data will not be saved once the average reading set is saved.
Review Results (Measurements) Function Keys
Repeat Reading
Use the Repeat Reading key to return back to the data acquisitions screen where
additional data can be acquired. This key is only active when 10 or less readings are
is listed.
Note
When 10 readings are displayed, you will need to delete a reading
before you will be able to acquire another reading.
Note
If you exit the Review Measurements screen when 10 readings are dis-
played, then go to the Sweep Laser Heads step and acquire an eleventh
reading, a warning message will be displayed when you return to the
Review Measurements screen. The warning message will give you the
option of either discarding the eleventh reading or deleting the first reading
and keeping the eleventh. If you answer yes, then the first reading is deleted
and the eleventh reading kept. If you answer no, then the eleventh reading is
discarded.
If you answer yes to deleting the first reading, it cannot be
retrieved.