Emerson 2130 RBM Consultant Pro, Reference Manual

Page: 188 / 394

3-108 Horizontal Alignment
Caution!
To prevent damage to the laser heads, make sure the antennas do not come into
contact with obstacles (e.g. the ground or base plate) as they are being rotated.
Also, when performing an uncoupled alignment and the laser heads are
mounted in close proximity to each other, make sure the antennas do not come
into contact with each other as one laser head is rotated past the other.
Foot Pre-Check key
Use the Foot Pre-Check key to perform a Soft Foot or FDI check. If you choose to
do one of the Foot Pre-Check procedures, the software warns you that any previ-
ously collected data in the present data collection set will be deleted. Refer to the
Foot Pre-Check section on page 3-76 for more information about performing a
Foot Pre-Check.
Check Lasers key
Use the Check Lasers key on the Alt screen to check the operational status of the
heads. Refer to the Check Lasers section on page 3-30 for more information.
Review Results key
Use the Review Results key on the Alt screen to return to the Review Measurements
screen where you can continue reviewing and averaging together the results from
multiple acquisitions. This key is available only when the Review Results option is
enabled on the Alt Main screen and the Review Measurements screen has been
exited before the averaged reading set was saved. Refer to the Review Results sec-
tion on page 3-121 for more information.