Emerson 2130 RBM Consultant Pro, Reference Manual

Page: 294 / 394

4-8 Vertical Alignment
Vertical Alt Main Screen Function Keys
Note
Use the Notes key to advance to the Notes screens where notes can be
assigned to the current job. In addition to the predefined notes, user
defined notes can also be created and assigned to the current job
from under this option. Refer to the Notes section on page 3-7 for
more information.
Machine Config
Use the Machine Config key to advance to the Machine Configuration screen
where the machine components for the job can be defined. Refer to the Vertical
Machine Configuration section on page 4-11 for more information.
Laser Angle Advance
Use the Laser Angle Advance key to define the fine and coarse incremental adjust-
ments to be applied to the angular position of the laser heads during the data acqui-
sition and live move operations. Refer to the Laser Angle Advance section on page
4-13 for more information.
Laser Mode
Use the Laser Mode key to define the mode of operation for the alignment
method defined. When selected, the mode is toggled between Standard (default)
and Averaging.
The Standard mode of operation is the mode that is most often used during ver-
tical alignments. In this mode of operation, the current laser reading is obtained
from the laser heads.
The Averaging mode of operation is intended to allow multiple sampling of data
in order to reduce the noise in the data by averaging all of the acquired values. In
this mode of operation, the last 20 readings are averaged.