Emerson 2130 RBM Consultant Pro, Reference Manual

Page: 194 / 394

3-114 Horizontal Alignment
Initialize Lasers key
Use the Initialize Lasers key to initialize the laser heads and advance to the next step
in the procedure. The Enter key can be used to do the same.
Foot Pre-Check key
Use the Foot Pre-Check key to perform a Soft Foot or FDI check. If you choose to
do one of the Foot Pre-Check procedures, the software warns you that any previ-
ously collected data in the present data collection set will be deleted. Refer to the
Foot Pre-Check section on page 3-76 for more information about performing a
Foot Pre-Check.
Check Lasers key
Use the Check Lasers key on the Alt screen to check the operational status of the
heads. Refer to the Check Lasers section on page 3-30 for more information.
Review Results key
Use the Review Results key on the Alt screen to return to the Review Measurements
screen where you can continue reviewing and averaging together the results from
multiple acquisitions. This key is available only when the Review Results option is
enabled on the Alt Main screen and the Review Measurements screen has been
exited before the averaged reading set was saved. Refer to the Review Results sec-
tion on page 3-121 for more information.