Emerson 2130 RBM Consultant Pro, Reference Manual

Page: 147 / 394

3-67 Laser Address Selection
Offset is the difference in the coupling halves at the top. For this parameter, either
the coupling of the left machine is higher than the right machine or the coupling
of the right machine is higher than the left machine.
Set Gap and Set Offset keys
Use the Set Gap and Set Offset keys to enter the gap and offset thermal growth for
the corresponding direction.
Set Direction keys
Use the Set Direction keys to define whether the coupling gap is open at the top or
bottom and to set whether the coupling offset of the left machine is higher than the
right machine or the coupling offset of the right machine is higher than the left
machine for the corresponding direction.
Enter key
Use the Enter key to advance to the Growth at Feet screen.
The Growth at Feet screen displays the calculated vertical and horizontal thermal
growth at each machine foot. Refer to the Growth at Profile section on page 3-59
for more information.