Emerson 2130 RBM Consultant Pro, Reference Manual

Page: 321 / 394

4-35 Vertical Alt Main Screen
Get Laser Angle key
Use the Get Laser Angle key on the Alt screen to automatically get the angle posi-
tion of the laser heads. This option is useful when performing alignments on hori-
zontally mounted machinery where the movement is at the flange instead of at the
feet. This option can also be changed from the Alt Laser Head Status screen and
the Live Move option.
Display during collection of angle data; note green background in 180
° “window”
- a graphic
illustration that the two lasers are within 2
° angular alignment
of one another
The current laser head positions are displayed just to the left of the flange and
graphically (represented by red lines) in the center of the flange. The background
of the angle positions will be white if the laser heads are not within 2° of each other
and green when the laser heads are within 2° of each other.
Note
Independently of how the data acquisition angular location is
obtained, other than the screen layout, the procedure for acquiring
vertical data is the same.