Dionex ASE 100, Operator'S Manual

Page: 73 / 150

5 • Service
Doc. 031842-01 5/02
5-3
9. With the cap assembly upright on the workbench, install the snap ring:
a. Insert the snap ring tool into the holes on the ring.
b. Squeeze the tool handles to bring the ends of the ring together.
c. Insert the ring into the cap. Using your fingers, push the ring
under the lip of the end cap. After verifying that the entire ring is
under the lip, release the tension on the tool and remove the tool
from the ring.
d. Screw the cap back onto the cell body and hand-tighten.
Figure 5-1. Extraction Cell Assembly