Dionex ASE 100, Operator'S Manual

Page: 129 / 150

C • User Interface
Doc. 031842-01 5/02
C-3
C.1.2 Status Screen
Use the
STATUS
screen to monitor the progress of a method run. The
screen is updated three times per second. You cannot edit any information
on this screen.
Figure C-3. Status Screen
Parameter Description
STATUS The method step in progress, if any, or the current
system status. If the latter is indicated, the
STATUS
field
will display one of the following descriptions: Initialize,
Idle, Load, Fill, Preheat, Heat, Oven Wait, Oven Ready,
Static, Flush, Purge, Relief, Unload, Rinse, or Abort. If
the status is Static or Flush, the cycle number is
indicated.
METHOD The name or number of the current method.
VOL The approximate volume (in mL) of solvent delivered
by the pump since the method started.
PRESSURE The current pressure reading. Select the unit of measure
on the
SETUP
screen (see Section C.1.3).
TEMP The oven temperature specified in the method.
TIME Elapsed time (in minutes and seconds) since the method
started running.