Dionex ASE 100, Operator'S Manual

Page: 36 / 150

ASE 100 Operator’s Manual
3-4
Doc. 031842-01 5/02
3. Insert the solvent outlet line extending from the underside of the
bottle cap assembly into the bottle (see Figure 3-1). Make sure the in-
line filter rests on the bottom of the bottle. (This prevents air from
being drawn through the line.)
4. Hand-tighten the red lock ring cap securely over the stopper.
NOTE Always connect the outlet line to the SOLVENT
connector first, and then the inlet line to the GAS
connector. Reverse this order when disconnecting
the lines. It is not necessary to disconnect the solvent
and gas lines before refilling the solvent bottle.
Figure 3-1. Solvent Bottle Connections (Top view)