Dionex ASE 100, Operator'S Manual

Page: 55 / 150

3 • Operation and Maintenance
Doc. 031842-01 5/02
3-23
9. Close the cell door and press
START
to begin the extraction. A typical
extraction takes 15 to 25 minutes.
10. When the extraction is complete, three beeps are emitted and the
START
LED
turns off.
11. If you need to start the next extraction right away, put on the thermal gloves
(P/N 060372) supplied in the ASE 100 Ship Kit (P/N 059397), remove the
cell from the cell holder, and place it on the cell rack (P/N 059927) to cool.
If you are not starting another extraction right away, open the cell door and let
the cell cool in the cell holder for at least 15 minutes. Afterward, put on the
thermal gloves, remove the cell from the cell holder, and place it on the cell
rack. Close the cell door until the next extraction, to save energy and prevent
anybody from accidentally touching the inside of the door while it is hot.
Do not attempt to open the cell door while an extraction is in
progress.
N'ouvrez pas la porte pendant une extraction.
Halten Sie die Tür während der Extraktion geschlossen.
Cells are extremely hot after an extraction. Be especially
cautious with cells that have been heated over 50 °C (122 °F).
Les cellules sont extrêmement chaudes après une extraction.
Faites particulièrement attention aux cellules qui ont été
chauffées à plus de 50 °C.
Die Zellen sind nach ihrer Entnahme sehr heiß. Seien Sie
besonders vorsichtig, wenn Zellen über 50°C erhitzt wurden.