Dionex ASE 100, Operator'S Manual

Page: 120 / 150

ASE 100 Operator’s Manual
B-10
Doc. 031842-01 5/02
B.2.5 Waste Bottle Installation
A 250 mL collection bottle (P/N 056284, pkg. of 12)–minus the standard
bottle cap–is used to collect condensed vented solvent during a sample
extraction. A built-in waste bottle cap is installed above the bottle holder
on the ASE 100 front panel (see Figure B-6).
1. Lift the built-in waste bottle cap with one hand. With your other hand,
tilt the waste bottle at a slight angle and position it below the bottle
cap. While being careful not to bend the tubing that extends from the
bottle cap, insert the bottle into the bottle cap.
2. Screw the bottle into the cap and release the bottle, allowing it to
swing gently into place.
Figure B-6. Installing the Waste Bottle